| Agitation |
Drive |
DC motor, AC Gear motor top drive motor (mechanical drive) |
| Range |
50-550 rpm 1 rpm |
| Sensor |
Magnetic hall sensor |
| Impellers |
Turbine impeller (SUS 316L) Foam breaker (SUS 316L) |
| Control |
Microprocessor based PID |
| Temperature |
Range |
From 3 above the cooling water temperature to 80 (accuracy 0.1) |
| Control |
The temperature is automatically controlled by the external heat exchanger system |
| Sensor |
RTD (Pt-100) |
| Aeration |
Sparger |
Ring sparger (SUS 316L) |
| Inlet filter |
The cartridge type sterilizable pleated type 0.2μm absolute filter is applied |
| Outer filter |
Same as inlet filter specification (optional item) |
| Control range |
Different vessel size and/or ordered specifications |
| Materials and finish |
Vessel |
Using 316L stainless steel it is polished mechanically and/or electrically |
| Piping |
316L stainless steel prevents contamination and is polished by electrically |
| O-rings/gaskets |
Viton or silicone material is used for the O-ring and the EPDM is used for the gasket |
| Control unit |
Panel |
8.5" Graphic Color LCD, membrane keypad |
| Communications |
Memory stick, printer, computer with the RS-232C communication protocol |
| Controller board |
Microprocessor based integrated controller board is adopted to measure, control and display the fermentation system |
| Pressure control |
The pressure is controlled manually and/or automatically |
| Power supply |
220V 50/60Hz single phase, 380V 50/60Hz three phase |